AVAILABLE SOON!

The Evap Pro is the ideal solution! The Evap Pro is a safe, energy-efficient humidifier that can be connected to a Brink heat recovery ventilation unit, such as the Flair. The Evap Pro ensures that the filtered air brought into the home by the ventilation unit is also optimally humidified. The Evap Pro is installed as a system module in the supply duct after the HRV unit. It is fully automatic and is available in two versions: the Evap Pro 800 and 1500. 

For optimum comfort, the relative humidity (RH) in your home should be between 40% and 60%. If the outdoor temperature is low, the relative humidity can fall below 40%. The Evap Pro humidifier is automatically activated if the outside temperature drops below 12 °C. The humidifier automatically humidifies the air that has been filtered and has passed through the heat exchanger in the ventilation unit. This guarantees even greater comfort. This is particularly important during the winter months, when the indoor humidity level often drops. The Evap Pro maintains the optimum humidity level in your home. Because the humidifier is connected to the water supply, there is no need to fill it with water by hand. 

It works based on the natural water evaporation process (adiabatically). The dry air flows through a water-absorbing glass fibre matrix and absorbs the water vapour from the humid surface. 

This raises the relative humidity of the incoming ventilation air. The built-in heater increases the capacity and performance, but only if necessary. This process is highly efficient and uses very little energy. The humidifier works fully automatically and silently. You can check its operation using the optional controller.